Setting the correct crossover point, the blend between your speakers and subwoofer, depends on room acoustics, placement, and personal preference.
The values below are recommended starting points to help you get up and running. From there, we encourage you to experiment and fine-tune based on what sounds best in your setup.
AV vs Stereo – What’s the Difference?
We divide recommendations into two categories: AV (home theater) and Stereo.
AV Systems
AV receivers use an active crossover, meaning:
The AVR applies both high-pass (to speakers) and low-pass (to subwoofer) filters
You should set the subwoofer’s internal low-pass filter to bypass
You can increase overall system output by using a slightly higher crossover point, but we recommend not exceeding 120 Hz to avoid bass becoming localizable.
Stereo Systems
Most stereo systems do not use an active high-pass filter.
This means:
Your speakers play full range, rolling off naturally in the bass
The subwoofer is blended in using only its low-pass filter
The goal is to achieve the smoothest and most natural transition between speakers and subwoofer.
*In the rare case, your Stereo setup has an active crossover, use the Home Theater settings.
Recommended Crossover Settings
Home Theater (AV)
1961 Series
1961 Tower – 80 Hz
1961 Monitor – 100 Hz
1961 Center – 100 Hz
1961 Bookshelf – 100 Hz
1961 Surround – 100 Hz
1961 Height – 100 Hz
1723 Series S
1723 Tower S – 80 Hz
1723 Monitor S – 80 Hz
1723 Center S – 80 Hz
1723 Bookshelf S – 90 Hz
1723 Surround S – 100 Hz
1723 Height S – 90 Hz
1723 Series
1723 Tower – 80 Hz
1723 Monitor – 80 Hz
1723 Center – 80 Hz
1723 Surround – 80 Hz
Stereo
1961 Series
1961 Tower – 60 Hz
1961 Monitor – 90 Hz
1961 Bookshelf – 100 Hz
1723 Series S
1723 Tower S – 50 Hz
1723 Monitor S – 60 Hz
1723 Bookshelf S – 80 Hz
1723 Series
1723 Tower – 40 Hz
1723 Monitor – 50 Hz
Final Thoughts
These crossover points are guidelines, not fixed rules. Every room and setup is different, and small adjustments can make a big difference.
Take your time, listen carefully, and aim for:
Smooth bass integration
No gaps or overlap in frequency response
A natural and balanced sound
If you need help optimizing your setup, our team is always happy to assist.
Comments
0 comments
Article is closed for comments.